Tektronix 4010

Tektronix 4010
Manufacturer	Tektronix
Model	4010
Lifetime
Introduced	May, 1972
Introductory Price	$3,950
Discontinued	1983
Communication
Interface	RS-232C
Baud Rates	110, 150, 300, 600, 1200, 2400, 4800, 9600
Character Modes
Resolution	72x35
Attributes	Normal
Matrix	5x7
Cell	7x9
Graphic Modes
Type	Monochrome
Resolution	780x1024
Firmware
CPU	Discrete Logic
Code Chart	Tektronix 4010
Software Libraries
gnuplot Name	tek40

The Tektronix 4010 terminal is an upper-case only graphics terminal introduced in May, 1972 at a price of $3,950.^[1]^[2] The 4010-1 includes hardcopy circuitry that allows the stored image to be read out by the Tektronix 4610 hard copy unit.

It is a direct view storage tube (DVST) graphics terminal that operates like an Etch A Sketch in that you can draw points, lines and characters on the screen, but once drawn you cannot selectively erase them. Instead, you must erase the entire screen. This is a consequence of the storage tube itself; images are drawn directly onto the tube and stored as a pattern of electric charge on the front of the tube. As long as the tube is properly powered, the image remains visible until cleared.

Data Communications Interfaces
Option	Description
Standard	RS-232C, Strap selectable baud rates of 150, 300, 600, 1200, 2400, 4800 and 9600 baud.
1	RS-232C, Switch selectable local echo, full/half duplex, independent transmit/receive baud rates of 110, 150, 300, 600, 1200, 2400, 4800 and 9600.
Teletype Interfaces
2	DEC PDP-11
3	DEC PDP-8/I, 8/L, 12, 15
4	Data General Computers
5	DEC PDP-8/E with Module M865
5A	DEC PDP-8/E with Module M8650
6	HP 2100 Series, 2000A (12531 card)
7	Varian 620/i, 620/L, 620/R
9	Raytheon 703, 704, 706
10	DEC PDP-8 (S/N 150 and up), PDP-9
10A	DEC PDP-8 (S/N 149 and below)
11	Honeywell H316
12	Honeywell DDP 516
13	Interdata Computers and G.E. Process Computers with Teletype Control Card Type 32-062 F01
13A	Interdata Computera and G.E. Process Computers with Teletype Control Card Type 32-120 F01
14	Varian 620F